MT9J003I12STCU, MT9J003I12STMU ONSEMI 1/2.3" 10 million pixel (10MP) rolling shutter industrial camera parallel interface image sensor
2022-04-21 22:49:54
Buy Now
MT9J003I12STCU(RGB color), MT9J003I12STMU(monochrome B/W),Original in stock.
ONSEMI aptina Micron 10Mp SENSOR, 1/2.3 CMOS SENSOR, parallel interface 10 million pixel image sensor, 10MP cmos sensor, industrial camera chip, high resolution image sensor, 10 million pixel sensitive chip, file camera sensor
Application module:
Features
• 1080p digital video mode
• Simple two-wire serial interface
• Auto black level calibration
• Support for external mechanical shutter
• Support for external LED or xenon flash
• High frame rate preview mode with arbitrary downsize scaling from maximum resolution
• Programmable controls: gain, horizontal and vertical blanking, auto black level offset correction, frame size/rate, exposure, left–right and top–bottom image reversal, window size, and panning
• Data interfaces: parallel or four-lane serial high-speed pixel interface (HiSPi™) differential signaling (sub-LVDS)
• On-die phase-locked loop (PLL) oscillator
• Bayer pattern downsize scaler
• Integrated position-based color and lens shading correction
• One-time programmable memory (OTPM) for storing module information
Applications
• Digital video cameras
• Digital still cameras
• Industrial camera
• Document camera
General Description
The Aptina MT9J003 is a 1/2.3-inch CMOS active-pixel digital imaging sensor with an active pixel array of 3856H x 2764V including border pixels. It can support 10megapixel (3664H x 2748V) digital still images and a1080p (3840H x 2160V) digital video mode. It incorporates sophisticated on-chip camera functions such aswindowing, mirroring, column and row skip modes, and snapshot mode. It is programmable through a simple two-wire serial interface and has very low power consumption.
Ordering Information
Table 1: Available /Part Numbers
Part Number /Description
MT9J003I12STCV2： HiSPi 48-pin iLCC, 0° CRA
MT9J003T12STCV： HiSPi 48-pin tPLCC, 13.4° CRA
MT9J003D00STCV C2CBC1： HiSPi Bare Die, 0° CRA
MT9J003I12STCU ：Parallel 48-pin iLCC, 0° CRA
MT9J003I12STMU：Monochrome（B/W） Parallel 48-pin iLCC, 0° CRA
General Description
The MT9J003 digital image sensor features Aptina’s breakthrough low-noise CMOS imaging technology that achieves near-CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS.
When operated in its default 4:3 still-mode, the sensor generates a full resolution image at 15 frames per second (fps) using the HiSPi serial interface. An on-chip analog-todigital converter (ADC) generates a 12-bit value for each pixel.
Functional Overview
The MT9J003 is a progressive-scan sensor that generates a stream of pixel data at a constant frame rate. It uses an on-chip, phase-locked loop (PLL) to generate all internal clocks from a single master input clock running between 6 and 48 MHz. The maximum output pixel rate is 80 Mp/s, corresponding to a pixel clock rate of 80 MHz. A block diagram of the sensor is shown in datasheet's Figure 1.
https://en.sunnywale.com/uploadfile/2022/1212/MT9J003-最新_Awin.PDF
Click or copy the link to free download the datasheet PDF file.
Freight is free when you buy 2 pieces in China, if you have MT9J003 inventory, you can sell to me, if you need buy MT9J003, you can ask me to buy.
If you are not used to reading Chinese, you can read the 中文 version
Buy now MT9J003
