SONiX SN98660系列是一个高度集成的H.264和MJPEG SoC解决方案。与硬线视频编码器架构，SN98660系列工作在时钟频率高达402兆赫。核心由一个arm926ejb -s CPU和16kb I/D缓存组成，用于计算多流视频编码或图像分析，如目标检测等智能监控应用。264编码器支持1080p30 + 640p30帧, 720p30帧 + 720p30帧，或720p30帧 + 640p30帧多数据流。

 

SN98660系列平台为多媒体嵌入式系统应用集成了广泛的基本组件，如IP摄像机、行车摄像机和无线显微镜。SN98660系列包括H.264编码器，MJPEG编码器，并行/MIPI传感器接口，ISP，串行flash, SD卡，DDR2, I2S/ADPCM音频控制器与音频DAC和ADC, CRC-16引擎，usb2.0主机和设备，DMA, 10/100M以太网，安霸2.0总线框架。

 

SN98660系列受到基于Linux或RTOS的开发环境的支持，这使得它适合于各种嵌入式多媒体应用程序和解决方案。

 

CPU: arm926ejb - s处理器402 MHz, 16kb I/D缓存

内存: SiP DDR2 64 MB到402 MHz, 16位数据总线

ISP: 支持AE/AWB/AF/HDR和alpha混合OSD

视频编解码器: H.264 BP/MP/HP水平4.1和基线JPEG编码

                    速率控制支持手动感兴趣区域(MROI)的8个区域

                    灵活的多流

传感器输入接口: 并行数据输入(10位RAW和YUV 4:2:2)

                        MIPI CSI-2，带有一个数据通道(800 Mbps)

传感器分辨率和格式: 2048 x 1536(300万像素)，1600 x 1200(200万像素)，1920 x 1080 (FHD)， 1280 x 1024 (SXGA, 1.3万像素)，1280 x 720(高清)，

                               640 x 480 (VGA, 330万像素)与CMOS ISP/拜耳原始传感器

音频编解码器: 16位sigma-delta ADC和10位R2R DAC

以太网: 一个带有RMII接口的10/100M以太网

USB: 一个USB 2.0主机控制器和一个USB 2.0设备控制器

SD/SDIO: 一个SD/SDIO控制器支持标准SD/SDIO 1.0/1.1/2.0规范，兼容SD3.0 (SDXC)

DMA控制器: 支持内存到内存和内存到外设传输的四个通道

CRC-16: 硬件CRC-16编解码器

              多项式的CRC-16为X16 + X15 + X2 + 1

外设: 10 / 100M以太网媒体访问控制器

         I2C x 1, UART x 2, PWM x 3, GPIO x 3, SPI x 1，和Pinmux x 38

         RTC，看门狗定时器，定时器和JTAG

电压: 铁芯:1.14V至1.26V(典型1.20V)

        DRAM: 1.7V至1.9 v(典型1.8V)

         I/O: 3.0V至3.6V(典型3.3V)

==================================================================================================

SN98660 Series

Multimedia Network Platform

version ：1 CG-BZZD-160728.2X

 

Description

SONiX SN98660 Series is a highly integrated H.264 and MJPEG SoC solution. With hardwired video encoder architecture, the SN98660 Series operates at clock frequencies up to 402 MHz. The core is comprised of an ARM926EJ-S CPU with 16 KB I/D cache for computing multi-stream video encoding or image analysis in intelligent surveillance applications such as object detection. The H.264 encoder supports 1080p30 + 640p30, 720p30 + 720p30, or 720p30 + 640p30 multi-streams.

 

The SN98660 Series platforms integrate a wide range of essential components for multimedia embedded systems applications such as IP cameras, dash-cams, and wireless microscopes. The SN98660 Series includes H.264 encoder, MJPEG encoder, parallel/MIPI senor interface, ISP, serial flash, SD card, DDR2, I2S/ADPCM audio controller with Audio DAC and ADC, CRC-16 engine, USB 2.0 host and device, DMA, 10/100M Ethernet, and AMBA 2.0 bus framework.

 

The SN98660 Series is supported by Linux or RTOS based development environments making it suitable for various embedded multimedia applications and solutions.

 

Features

Hardware: Details

CPU :ARM926EJ-S Processor 402 MHz with 16 KB I/D cache

Memory: SiP DDR2 64 MB up to 402 MHz, 16-bit data bus

ISP: Supports AE/AWB/AF/HDR and alpha-blending OSD

Video Codec: H.264 BP/MP/HP Level 4.1 and Baseline JPEG encode Rate control supporting Manual Region of Interest (MROI) with 8 Regions

Flexible multi-streaming

 

Sensor Input Interface: Parallel data input (10-bits RAW and YUV 4:2:2)

                                      MIPI CSI-2 with one data lane (800 Mbps)

Sensor Resolution and Format: 2048 x 1536 (3MP), 1600 x 1200 (UXGA, 2MP), 1920 x 1080 (FHD), 1280 x 1024 (SXGA, 1.3MP), 1280 x 720 (HD),                                                    640 x 480 (VGA, 0.3MP) with CMOS ISP/Bayer RAW sensors

Audio codec：16-bit sigma-delta ADC and 10-bit R2R DAC

Ethernet：One 10/100M EtherMAC with RMII interface

USB：One USB 2.0 host controller, and one USB 2.0 device controller

SD/SDIO：One SD/SDIO controller supports standard SD/SDIO 1.0/1.1/2.0 specification and is compatible with SD3.0 (SDXC)

DMA Controller：Four channels that support memory to memory and memory to peripherals transfers

CRC-16：Hardware CRC-16 codec

               CRC-16 with polynomial is X16 + X15 + X2 + 1

Peripheral：10 / 100M Ethernet media access controller

                    I2C x 1, UART x 2, PWM x 3, GPIO x 3, SPI x 1, and Pinmux x 38

                    RTC, watchdog timer, Timer, and JTAG

Voltage：Core: 1.14V to 1.26V (1.20V typical)

                DRAM: 1.7V to1.9V (1.8V typical)

                I/O: 3.0V to 3.6V (3.3V typical)