PAN4561M, Panasonic Mesh Network 800 ft (32 m) RF module, ENWC9A25A1EF & ENWC9A25A4EF, IEEE802.15.4 Long range 2.4GHz ISM band transceiver, based on Freescale MC13213 SOC
2023-08-09 12:36:35
Buy Now
PAN4561M, Panasonic mesh network 800 ft (32 m) RF module, ENWC9A25A1EF, ENWC9A25A4EF, IEEE802.15.4 module, remote 2.4GHz ISM band transceiver, SOC based on Freescale
Panasonic, a worldwide leader in Wireless Products introduces the NEW PAN4561M Series of Mesh Networking RF Modules. These cost engineered modules are designed for applications up to 800 feet in range and are optimized to deliver longer range while conserving power consumption, using both a noise amplifier and 10db power amplifier. PAN4561M modules are medium range alternatives to Panasonic’s original extended range PAN4561 Series devices.
The PAN4561M Series can be transformed from simple point-topoint proprietary devices to complex mesh networks by choosing from an array of simple firmware options. Fully featured with 39 I/O lines, sharing a common 62-pin footprint and software, each model hosts the FreeScale MC13213 Software-on-a-chip (SOC), using the same eight-bit GT60 processor as Panasonic's popular PAN4555 and making the product family application-compatible. Optional Synapse SNAP firmware provides a highly flexible, industry-leading solution for mesh networking with a complete network development environment. Multiple antenna options are available. The Series has FCC, IC, and ETSI certifications.
Product Performance
● Small Size: 35mm x 15mm x 3.5mm
● 3 Antenna Options: Single Port 50Ω, Ceramic Antenna or SMD Output
● Low Power Modes for Increased Battery Life
● 16 Selectable Channels w/ 250 Kbps (2.4 GHz)
● High Sensitivity: -105 dBm Typical at 1% Packet Error Rate
● +10 dBm Typical Output Power Programmable Over a 30 dB Range
● Low Supply Voltage: 2.7 V to 3.3 V (3.0 V Typ.)
● Operating Temperature Range: -40℃ to +85℃
● Link Quality & Clear Channel Assessment Capability
● 60k Flash and 4k RAM Memory
● Two UARTs and One I2C Bus
● 8 Channel A/D Converter with 10 Bit for Fast and Easy Analog Input Conversion (Temperature, Pressure and Fluid Levels) to Digital Values
● 5 Channel 16-Bit Timer/Pulse Width Modulation (Tpm) Outputs
● BDM Port for Direct Download Programming
● 39 Digital I/O Lines with Programmable Pull-Ups and Several with High-Current Driver
KEY FEATURES
● Short range 2.4GHz ISM band transceiver with microcontroller and reference oscillator
● Provides complete hardware for a wireless node using IEEE802.15.4 packet structure
● Compact size (35.0mm x 15.0mm x 3.8mm)
● 3 antenna options: ceramic antenna onboard, ext. antenna connected to Single port 50Ω or antenna plug
● 16 selectable Channels with 250 kbps in the 2.4 GHz band
● Low power modes for increased battery life
● High sensitivity of -102 dBm typ. at 1% Packet Error Rate (PAN4561H /M)
● +20 dBm max. output power (PAN4561H)
● Programmable output power over a 30 dB range
● Low supply voltage (2.7V to 3.4 V, 3.0 V typ.)
● Operating temperature range -40°C to +85°C
● Link Quality and Clear Channel Assessment capability
● 60k Flash and 4k RAM memory
● 8 channel A/D converter with 10 Bit for fast and easy conversion from analog inputs -such as temperature, pressure and fluid levels- to digital values.
● 5 channel 16 Bit timer/pulse width modulation (TPM) outputs
● BDM port for direct download programming
● In total 39 digital I/O lines most with programmable pull-ups and few with high-current driver.
● Low power modes for increased battery life
● Low battery warning
● Low voltage detect/reset
● Complies to FCC Part 15
PAN4561M Part Numbers:(Only the following two red part numbers are in stock)
Part Numbers / Description (all parts 802.15.4, 10 db PA)
● ENW-C9A25A1EF： Antenna-w/o-Firmware
● ENW-C9A25A4EF： Antenna-SNAP-Firmware
● ENW-C9A25B1EF：UF.L Connector-w/o-Firmware
● ENW-C9A25B4EF：UF.L Connector-SNAP-Firmware
● ENW-C9A25C1EF：50 ohm-Pad-w/o-Firmware
● ENW-C9A25C4EF：50 ohm-Pad-SNAP-Firmware
● EVAL_PAN4561：Evaluation Kit for the PAN4561
● ENW-C9A30A4EF：Eval Module w/ Ceramic Antenna, SNAP-FW
● ENW-C9A30B4EF：Eval Module w/ UFL Connector, SNAP-FW
● ENW-C9A30D4EF：Eval Module with SMD RF Out, SNAP-FW
Applications
● Factory Automation and Control
● Home Gateways/Home Automation and Control
● Motor/Lighting Control
● Inventory and Logistics Management
● HID (Human Interface Devices)
● Toys
● Remote Control and Wire Replacement for Industrial Systems (Wireless Sensor Networks)
● RFID Tagging
● Automated Meter Reading
● Monitoring (Environmental, Patient, Fitness)
● Proprietary Networking Solutions Using IEEE802.15.4
Features
● 802.15.4 mesh network module with ceramic antenna, low noise amplifier, up to +10dBm power amplifier
● Synapse SNAP software included, 60kBit flash memory, compact size (35.0mm x 15.0mm x 3.8mm)
● Provides complete hardware for a wireless node using IEEE802.15.4 packet structure
● 16 selectable channels with 250Kbps in the 2.4GHz band
● Low power modes for increased battery life
● Programmable output power over a 30dB range
● Low supply voltage (2.7V to 3.4V, 3.0V typ), operating temperature range from -40°C to +85°C
● Link quality and clear channel assessment capability, 60K flash and 4K RAM memory
● Low power modes for increased battery life, low battery warning
● Low voltage detect/reset, complies to FCC part 15
Related products with the same datasheet
ENWC9A22A1EF
RF Modulation: Data Rate Max: 0.25Mbps, Frequency Max:2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min: 2.7V, Supply Voltage Max: 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A22C4EF
RF Modulation: Data Rate Max: : 0.25Mbps, Frequency Max: : 2.4GHz, Sensitivity dBm: : -102dBm, Supply Voltage Min: : 2.7V, Supply Voltage Max: : 3.4V, Module Interface: : BDM, I2C, GPIO, UART, Supply
ENWC9A22A4EF
RF Modulation: Data Rate Max: 0.25Mbps, Frequency Max: 2.4GHz, Sensitivity dBm: -102dBm, Supply Voltage Min: 2.7V, Supply Voltage Max : 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A25A1EF
RF Modulation: Data Rate Max: : 0.25Mbps, Frequency Max: 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface: : BDM, I2C, GPIO, UART, Supply
ENWC9A25B1EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : , Supply Current : 72mA,
ENWC9A21C1EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : , Supply Current : 43mA
,
ENWC9A21B1EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A21A4EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A25B4EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A21C4EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max: 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface: , Supply Current: : 43mA,
ENWC9A25C1EF
RF Modulation:Data Rate Max: 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : , Supply Current: : 72mA,
ENWC9A22C1EF
RF Modulation:Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max: 3.4V, Module Interface : -, Supply Current: : 200mA,
ENWC9A25C4EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : -, Supply Current : 72mA
,
ENWC9A22B1EF
RF Modulation: Data Rate Max: : 0.25Mbps, Frequency Max: : 2.4GHz, Sensitivity dBm: : -102dBm, Supply Voltage Min: : 2.7V, Supply Voltage Max: : 3.4V, Module Interface: : -, Supply Current: : 200mA,
ENWC9A22B4EF
RF Modulation: Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -102dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : BDM, I2C, GPIO, UART, Supply
ENWC9A21A1EF
RF Modulation:Data Rate Max : 0.25Mbps, Frequency Max : 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max: : 3.4V, Module Interface: : BDM, I2C, GPIO, UART, Supply
ENWC9A21B4EF
RF Modulation:Data Rate Max:: 0.25Mbps, Frequency Max: 2.4GHz, Sensitivity dBm : -92dBm, Supply Voltage Min : 2.7V, Supply Voltage Max : 3.4V, Module Interface : -, Supply Current: : 43mA,
DESCRIPTION OF THE MODULE
The PAN4561with module is a short range, low power, 2.4 GHz ISM band transceiver which includes a complete 802.15.4 physical layer (PHY) modem, designed for the IEEE 802.15.4 wireless standard and an appropriate microcontroller (MCU) with reference oscillator which provides a cost effective solution for short-range data links and networks.
There are three versions of PAN4561 available, identified by an H, M or L at the end of series number i.e. PAN4561H, PAN4561M, PAN4561L. The addional letter stands for High, Mid and Low range.
All modules in the PAN4561 series are based on the FreeScale MC13213 SOC, fully featured with 39 I/O lines, interchangeable and share a common footprint and software. Mixed node networks can be implemented to conserve power while maximizing range. The PAN4561L is a cost optimized module designed for standard range applications of less than 30 meters. For medium range applications the PAN4561M, is optimized to deliver longer range and conserve power consumption, using a low noise amplifier and 10dBm power amplifier. The PAN4561H is designed for extended range applications, using a low noise amplifier and 20dBm power amplifier.
In this document when mentioned PAN4561 the information refers to all three module types. Data which apply only to a specific module (PAN4561 H /M /L) will be marked accordingly.
Software solutions available for the PAN4561 are SNAP software from Synapse Wireless Inc. and SN55 software from E-Senza Technologies GmbH which are very easy to use. For detailed information refer to SNAP [9] and and to SN55 [8].
In addition, you are free to develop also your own application on the software package from Freescale?, e.g. SMAC, for details please refer to [4], [5], [6] and [7].
All of the above pictures are taken after matting the online showing, what you see is what you get.
Click or copy the link to browser free download the ENWC9A25A1EF, ENWC9A25A4EF datasheet PDF file.
Freight is free when you buy 2 pieces in China, if you have PAN4561M inventory, you can sell to me, if you need buy PAN4561M, you can ask me to buy.
If you want to know about similar products ***, or click here，or Visit The official website:
sunnywale.com，Search the keywods“**”,it can show more details.
For more details and HD images, please copy the following link to open in your browser to view our official website；or visit our official website:
Sunnywale.com , searching keyword "**".
If you want to read the introduction in English, please Clict the
中文版
