Wide dynamic camera module, CP8108, 120dB dynamic range camera, 800TVL, 1/3-inch Analog camera CMOS sensor, CLAIRPIXEL CMOS, CMOS made in Korea, video doorbell module, large pixel unit sensor, CP8108 CLAIRPIXEL 1/3" New wide dynamic camera module 120dB, 800TVL for video doorbell security camera

Use of this specification for product design requires an executed license agreement from the ClairPixel.

The ClairPixel shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. All parts of the ClairPixel Specification are protected by copyright law and all rights are reserved. This documentation may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent, in writing, from the ClairPixel.

 

CP8108 is a single-chip video/image camera sensor that uses a unique WideyeTM technology developed by Clairepixel to allow video capture in extremely diverse lighting conditions, hence making it suitable for auto vehicle cameras and security systems. CP8108 is set up with a 720x480 image array, outputs up to 60 frames (720x480) per second, and supports various forms of digital output format and NTSC/PAL composite output. CP8108 has various camera control functions, and can be programmed through a two-wire serial interface.

 

.  ClairPixel’ s WideyeTM , Wide Dynamic Range technology

.  System-on-a-chip(SOC)-completely integrated camera system

.  Integrated microcontroller for flexibility

.  CVBS, 8-,10-bit parallel digital output

.  Bayer Noise Reduction, Lens Shading Compensation, Defective Pixel Compensation

.  Color Correction, Gamma Correction,

.  Hue/Saturation, Contrast/Brightness Control

.  Edge Enhancement

.  Parking Guide, OSD, Privacy Zone Mask,

.  Automatic features :

          Auto Exposure, Auto White Balance,

          Anti-Flicker, Black Level Calibration

.  NTSC/PAL encoder with 10bit DAC

.  2 channel(Master, Slave) Two-wire serial interface

.  Embedded 2 channel 8-bit General ADC for OSD & CdS

 

Optical Dimension:

    Optical Format 1/3 inch

    Pixel Size 6.5 um X 7.4 um

    Effective Resolution 720(H) X 480(V)

    Active Pixel Area 4.732 mm(H) X 3.611 mm(V)

Digital Output:

    10bit, 8bit RGB Bayer,

    YCbCr422,

    RGB565/555, CCIR656

Analog Output : CVBS( NTSC/PAL) @ 54MHz

Maximum Clock Frequency : 54MHz

Maximum Frame Rate : 

    720x480, 30fps @ 27MHz (YCbCr)

    720x480, 60fps @ 54MHz (YCbCr)

    720x480, 30fps @ 27MHz (Bayer)

    720x480, 60fps @ 54MHz (Bayer)

Shutter Type : Electronic Rolling Shutter

Sensitivity :  [T.B.D] V / lux-sec

Dynamic Range

SNR: [T.B.D] dB

Max. Programmable Gain : analog (x72), digital (x31.5)

GADC input voltage range : 0V~3V

Supply Voltage :

    Pixel 3.3V ± 10%

    Analog 3.3V ± 10%

    Digital 1.5V ± 10%

    I/O 3.3V ± 10%

Power Consumption : 

    Active [T.B.D]

    Standby [T.B.D]

Operating Temperature :  -40°C ~ 105°C

Package Type : 40pin CLCC, Wafer or Die

 

.   Automotive

.   Machine Visions

.   Security surveillance cameras

 

CP8108 is a CMOS D1 Image Sensor in 1/3-inch optical format with 340,000 pixels.

Figure 2-1 is a broad view of the block diagram of CP8108 and the 776x516 pixel array is output through TG, , ISP, Formatter to the 10-bit digital parallel port, or through NTSC/PAL Encoder, 10-bit Video DAC to analog composite port. 2 channel (master, slave) two-wire serial interface and 2 channel GPIO or PWM are provided for

external interface. 8 bit MCU is built in to provide an overall chip control and flexibility.

 

This document contains information on a new product. Specifications and information herein are subject to change without notice.