AR0144CSSM20SUKA0-CRBR ONsemi 1/4-inch 1280x800 1Mp 720P@66fps CMOS digital low light infrared  B/W monochrome image sensor, CRA20°, with global shutter exposure , MIPI or parallel interface output, Industrial inspection cameras for scanners and machine vision

AR0144CSSM20SUKA0-CRBR datasheet, ONsemi 1/4 Global shutter exposure SENSOR,1280x800 1Mp720P 66 frame CMOS sensor, digital low light infrared low light black and white image sensor,CRA20 degree 1/4 global shutter exposure,MIPI or parallel interface output, sensor for scanners and machine vision industrial inspection cameras

AR0144CSSM20SUKA0-CRBR Features

 ● Superior low-light and IR performance

 ● HD video (720p@66fps)

 ● 2-lane MIPI or Parallel data interface

 ● Automatic black Level Calibration (ABLC)

 ● Programmable control for Region Of Interest (ROI)

 ● Horizontal and vertical mirroring, windowing and pixel binning

 ●  On chip auto exposure control for any programmable ROI

 ● 5x5 Statistics engine for any programmable ROI

 ● Flexible control for row and column skip mode

 ● On-chip slave or trigger mode for synchronization

 ● Built in strobe control

 ● On chip Phase Lock loop (PLL)

 ● On-chip slave or trigger mode for synchronization

 

AR0144CSSM20SUKA0-CRBR Applications

 ● Bar code scanner

 ● Gesture Recognition

 ● 3D scanning

 ● Positional tracking

 ● Iris scanning

 ● Augmented reality

 ● Virtual reality

 ● Biometrics

 ● Machine vision

AR0144CSSM20SUKA0-CRBR General Description

The AR0144 is a 1/4-inch 1.0 Mp CMOS digital image sensor with an active-pixel array of 1280H x 800V. It

incorporates a new innovative global shutter pixel design optimized for accurate and fast capture of moving

scenes. The sensor produces clear, low noise images in both low-light and bright scenes. It includes

sophisticated camera functions such as auto exposure control, windowing, row skip mode, column-skip mode, pixel-binning and both video and single frame modes. It is programmable through a simple two-wire serial interface. The AR0144 produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including

scanning and industrial inspection.

 

Table 1: AR0144CSSM20SUKA0-CRBR Key Parameters

Parameter / Typical Value

 ● Optical format：1/4-inch (4.5 mm)

 ● Active pixels：1280H x 800V = 1.0 Mp

 ● Pixel size：3.0μm

 ● Color filter array：RGB Bayer or Monochrome

 ● Chief Ray Angle：0 or 20°

 ● Shutter type：Global shutter

 ● Input clock range：6 – 64 MHz

 ● Output pixel clock (maximum)：74.25 MHz

 ● Output

    ⊙ Serial MIPI, 2-Lane

    ⊙ Parallel 12-bit

 ● Frame rate

    ⊙ Full resolution 60 fps

    ⊙ 720p 66 fps

 ● Responsivity

    ⊙ Monochrome 3.6 V/lux-sec

    ⊙ Color 3.1 V/lux-sec

 ● SNRMAX：38 dB

    ⊙ Dynamic range：63.9 dB

 ● Supply voltage

    ⊙ I/O：1.8 or 2.8 V

    ⊙ Digital：1.2 V

    ⊙ Analog：2.8 V

 ● Power consumption：<250mW

 ● Operating temperature

    ⊙ –40°C to +85°C (ambient)

    ⊙ –40°C to +105°C (junction)

 ● Package options

    ⊙ 5.6 x 5.6 mm 69-ball CSP

    ⊙ Bare die

 

Table 2: AR0144 Available Part Numbers

Part Number / Product Description / Orderable Product Attribute Description

 ● AR0144CSSC00SUKA0-CPBR-E Color, CSP RGB-CSP; CRA = 0; with Protective Film, Double Side BBAR Glass

 ● AR0144CSSC00SUKA0-CRBR-E Color, CSP RGB-CSP; CRA = 0; without Protective Film, Double Side BBAR Glass

 ● AR0144CSSM00SUKA0-CPBR-E Mono, CSP MONO - CSP; CRA = 0; with Protective Film, Double Side BBAR Glass

 ● AR0144CSSM00SUKA0-CRBR-E Mono, CSP MONO - CSP; CRA = 0; without Protective Film, Double Side BBAR Glass

 ● AR0144CSSC00SUEAH-GEVB Color, CSP Head Board RGB - Headboard; CRA = 0

 ● AR0144CSSM00SUEAH-GEVB Mono, CSP Head Board MONO - Headboard; CRA = 0

 ● AR0144CSSC20SUKA0-CPBR-E Color, CSP RGB- CSP; CRA = 20; with Protective Film, Double Side BBAR Glass

 ● AR0144CSSC20SUKA0-CRBR-E Color, CSP RGB- CSP; CRA = 20; without Protective Film, Double Side BBAR Glass

 ● AR0144CSSM20SUKA0-CPBR-E Mono, CSP MONO - CSP; CRA = 20; with Protective Film, Double Side BBAR Glass

 ● AR0144CSSM20SUKA0-CRBR-E Mono, CSP MONO - CSP; CRA = 20; without Protective Film, Double Side BBAR Glass

 ● AR0144CSSC20SUEAH-GEVB Color, CSP Head Board RGB- Headboard; CRA = 20

 ● AR0144CSSM20SUEAH-GEVB Mono, CSP Head Board MONO- Headboard; CRA = 20

 ● AR0144CSSC00SUD20 Color, Bare Die RGB; CRA = 0

 ● AR0144CSSC20SUD20 Color, Bare Die RGB; CRA = 20

 ● AR0144CSSM00SUD20 Mono, Bare Die MONO; CRA = 0

 ● AR0144CSSM20SUD20 Mono, Bare Die MONO; CRA = 20

 

AR0144CSSM20SUKA0-CRBR General Description

The ON Semiconductor AR0144 can be operated in its default mode or programmed for frame size, exposure, gain, and other parameters. The default mode output is a full-resolution image at 60 frames per second (fps). It outputs 12-bit raw data, using either the parallel or serial (MIPI) output ports. The device may be operated in video (master) mode or in frame trigger mode.

 

FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a synchronized pixel clock. A dedicated FLASH pin can be programmed to control external LED or flash exposure illumination.

 

The AR0144 includes additional features to allow application-specific tuning:windowing, adjustable auto-exposure control, auto black level correction, on-board temperature sensor, row-skip and column-skip modes and binning modes.

The sensor is designed to operate in a wide temperature range (–40°C to +85°C).

 

AR0144CSSM20SUKA0-CRBR Functional Overview

The AR0144 is a progressive-scan sensor that generates a stream of pixel data at a constant frame rate. It uses an on-chip, phase-locked loop (PLL) that can be optionally enabled to generate all internal clocks from a single master input clock running between 6 and 64 MHz. The maximum output pixel rate is 74.25 Mp/s, corresponding to a clockrate of 74.25 MHz. Figure 1 shows a block diagram of the sensor.

 

AR0144CSSM20SUKA0-CRBR Features Overview

The AR0144 Global Shutter sensor has a wide array of features to enhance functionality and to increase versatility. A summary of features follows. Please refer to the AR0144 Developer Guide for detailed feature descriptions, register settings, and tuning guidelines and recommendations.

 ● 3.0 um Global Shutter Pixel

To improve the low light performance and to capture the moving images accurately a large (3.0 um) global shutter pixel is implemented for better image optimization.

 ● Operating Modes

The AR0144 works in master (video), trigger (single frame), or Auto Trigger modes. In master mode, the sensor generates the integration and readout timing. In trigger mode, it accepts an external trigger to start exposure, then generates the exposure and readout timing. The exposure time is programmed through the two-wire serial interface for both modes.

 ● Window Control

Configurable window size and blanking times allow a wide range of resolutions and frame rates. Digital binning and skipping modes are supported, as are vertical and horizontal mirror operations.

 ● Frame Rate:

AR0144 is capable of running up to 60 fps at full (1280x800) resolution and 66 fps at 720p resolution.

 ● Embedded Data and Statistics

The AR0144 has the capability to output image data and statistics embedded within the frame timing.

 ● Multi-Camera Synchronization

The AR0144 supports advanced line synchronization controls for multi-camera (stereo) support.

 ● Slave Mode

The slave mode feature of the AR0144 supports triggering the start of a frame readout from an input signal that is supplied from an external source. The slave mode signal allows for precise control of frame rate and register change updates.

 ● Context Switching and Register Updates

Context switching may be used to rapidly switch between two sets of register values. Refer to the AR0144 Developer Guide for a complete description of context switchable registers.

 ●  Gain

A programmable analog gain of 1x to 16x applied globally to all color channels is available along with a digital gain of 1x to 16x that may be configured on a per color channel basis.

 ● Automatic Exposure Control

The integrated automatic exposure control may be used to ensure optimal settings of exposure and gain are computed and updated every other frame. Refer to the AR0144 Developer Guide for more details.

 

All of the above pictures are taken after matting the online showing, what you see is what you get.

 

https://en.sunnywale.com/uploadfile/2025/0407/AR0144CS-Datasheet_Awin_watermark_encode.pdf

Click or copy the link to browser free download the AR0144CSSM20SUKA0-CRBR  datasheet PDF file (If you need to unlock the password, contact webmaster Wechat: 9308762).

 

Freight is free when you buy 2 pieces in China, if you have AR0144CSSM20SUKA0-CRBR  inventory, you can sell to me, if you need buy AR0144CSSM20SUKA0-CRBR , you can ask me to buy. 

 

If you want to know about similar products AR0144AT, or click here，or Visit The official website: sunnywale.com，Search the keywod“AR0144AT”,it can show more details.

 

For more details and HD images, please copy the following link to open in your browser to view our official website；or visit our official website: Sunnywale.com , searching keyword "AR0144CS". 

 

For more details, please click 中文版

 

Buy now AR0144CSSM20SUKA0-CRBR