Sign in / Sign up
IMX392LLR 1/2.3 inch 2.35MP@200fps frame/second SONY active pixel solid state ultra-low power monochrome CMOS image sensor, LVDS interface, global shutter, used in industrial automation cameras
2024-04-26 23:47:38
Buy Nowamazon

IMX392LLR datasheet download
IMX392LLR 1/2.3-inch 2.35MP@200fps frame/second SONY SONY active pixel solid state ultra-low power monochrome CMOS image sensor, LVDS interface, global shutter, used in industrial automation cameras, traffic intelligent system cameras

IMX392LLR specification download, 1/2.3-inch 2.35MP@200fps frame/second, SONY SONY active pixel solid state image sensor, ultra-low power consumption black and white monochrome CMOS image sensor, LVDS interface global shutter, used in industrial automation cameras, traffic intelligent system cameras


IMX392LLR Description 
The IMX392LLR is a diagonal 7.9 mm (Type 1 / 2.3) CMOS active pixel type solid-state image sensor with a square pixel array and 2.35 M effective pixels. This chip features a global shutter with variable chargeintegration time. This chip operates with analog 3.3 V, digital 1.2 V, and interface 1.8 V triple power supply, and has low power consumption. 
High sensitivity, low dark current and low PLS characteristics are achieved. 
 
IMX392LLR Applications
FA(factory automation) cameras, 
ITS(intelligent transportation system)cameras
1/2.3-inch 2.35MP@200fps
SONY active pixel solid state image sensor
IMX392LLR Features 
 ●  CMOS active pixel type dots 
 ●  Built-in timing adjustment circuit, H/V driver and serial communication circuit 
 ●  Global shutter function 
 ●  Input frequency :37.125 MHz / 74.25 MHz / 54 MHz 
 ●  Number of recommended recording pixels: 1920 (H) × 1200 (V) approx. 2.30 M pixels 
 ●  Readout mode :
     ※ All-pixel scan mode 
     ※ 1080p-Full HD readout mode 
     ※ Vertical / Horizontal 1 / 2 Subsampling mode 
     ※ 2 × 2 Vertical FD Binning mode 
     ※ ROI mode 
     ※ Vertical / Horizontal‐Normal / Inverted readout mode 
 ●  Readout rate 
     ※ Maximum frame rate in 
     ※ All-pixel scan mode: 8 bit 201.4 frame/s, 10 bit: 167.0 frame/s, 12 bit: 134.6 frame/s 
 ●  Variable-speed shutter function (resolution 1 H units) 
 ●  8-bit / 10-bit / 12-bit A/D converter 
 ●  CDS / PGA function 
      ※ 0 dB to 24 dB: Analog Gain (0.1 dB step) 
      ※ 24.1 dB to 48 dB: Analog Gain: 24 dB + Digital Gain: 0.1 dB to 24 dB (0.1 dB step) 
 ●  I/O interface :Low voltage LVDS (150 mVp-p) serial (2 ch / 4 ch / 8 ch switching) DDR output (594 / 297 Mbps per ch) 
 ●  Recommended lens F number: 2.8 or more (Close side) 
 ●  Recommended exit pupil distance: -100 mm to –∞ 
ultra-low power consumption monochrome CMOS image sensor
LVDS interface global shutter
IMX392LLR Device Structure 
 ●  CMOS image sensor 
 ●  Image size:Diagonal 7.9 mm (Type 1 / 2.3) Approx. 2.35 M pixels All-pixel 
                          Diagonal 7.7 mm (Type 1/2.35) Approx. 2.11 M pixels 1080p-Full HD 
 ●  Total number of pixels:1936 (H) × 1226 (V) Approx. 2.37 M pixels 
 ●  Number of effective pixels: 1936 (H) × 1216 (V) Approx. 2.35 M pixels 
 ●  Number of active pixels: 1936 (H) × 1216 (V) Approx. 2.35 M pixels 
 ●  Number of recommended recording pixels: 1092 (H) × 1200 (V) Approx. 2.30 M pixels All-pixel 
                                                                                1920 (H) × 1080 (V) Approx. 2.07 M pixels 1080p-Full HD 
 ●  Unit cell size 3.45 μm (H) × 3.45 μm (V) 
 ●  Optical black:Horizontal (H) direction: Front 0 pixel, rear 0 pixel 
                              Vertical (V) direction: Front 10 pixels, rear 0 pixel 
 ●  Package: 226 pin LGA 
 
Image Sensor Characteristics (Preliminary,Tj = 60 °C) 
used in industrial automation cameras
traffic intelligent system cameras
IMX392LLR Item                     Value                  Remarks 
Sensitivity (F8)      Typ.  915 mV   1/30 s accumulation 
Saturation signal   Min. 1001 mV 
 
IMX392LLR Basic Drive Mode 
Drive mode / Recommended number of recording pixels / Maximum frame rate [frame/s]  / Output interface / ADC [bit] 
All pixel 1920 (H) × 1200 (V) approx. 2.30 M pixels 
201.4 frame/s  /Serial LVDS 8 ch/ 8 bit
167.0 frame/s  /Serial LVDS 8 ch/ 10 bit
134.6frame/s  / Serial LVDS 8 ch /12 bit
 
All pixel (Vertical / Horizontal 1/2 subsampling) 
960 (H) × 600 (V) approx. 0.58 M pixels 
415.1frame/s  / Serial LVDS 8/ ch 8 bit
396.3frame/s  / Serial LVDS 8/ ch 10 bit
262.2 frame/s  / Serial LVDS 8/ ch 12 bit
 
Vertical FD Binning 960 (H) × 600 (V) approx. 0.58 M pixels 
415.1frame/s / Serial LVDS 8 ch/ 8 bit
396.3frame/s / Serial LVDS 8 ch/ 10 bit
262.2frame/s / Serial LVDS 8 ch/ 12 bit
 
HD1080p 1920 (H) × 1080 (V) approx. 2.07 M pixels 
120frame/s  / Serial LVDS 8 ch /10 bit
120frame/s  / Serial LVDS 8 ch /12 bit
industrial camera coms sensor
All of the above pictures are taken after matting the online showing, what you see is what you get.
 
https://en.sunnywale.com/uploadfile/2024/0427/IMX392LLR-C_E18720_Awin.pdf
Click or copy the link to browser free download the IMX392LLR datasheet PDF file.
 
Freight is free when you buy 2 pieces in China, if you have IMX392LLR inventory, you can sell to me, if you need buy IMX392LLR, you can ask me to buy. 
 
If you want to know about similar products IMX392LQR, or click here,or Visit The official website: sunnywale.com,Search the keywods“392LQR”,it can show more details.
 
For more details and HD images, please copy the following link to open in your browser to view our official website;or visit our official website: Sunnywale.com , searching keyword "IMX392LLR". 
 
If you want to read the introduction in English, please Clict the 中文版
 
Buy now IMX392LLR

Prev:IMX273LLR SONY 1/2.9-inch 1.6-megapixel 1440x1080p Global shutter LVDS interface High frame rate 276fps CMOS solid-state image sensor for monochrome industrial FA camera
Next:IMX392LQR 1/2.3-inch 2.35MP@200fps frame/second SONY active pixel solid state ultra-low power RGB(color) CMOS image sensor, LVDS interface, global shutter, used in industrial automation cameras