EV76C661ABT(B&W)/EV76C661ACT( Color) e2v 1280 x 1024 1/1.8" Industrial camera Monochrome or RGB global shutter CMOS Sensor,Hyperspectral response and high quantum efficiency,CMOS SENSOR
2022-11-21 20:53:21
Buy Now
EV76C661ABT(B&W)/EV76C661ACT( Color) e2v 1280 x 1024 1/1.8 Industrial camera Monochrome or RGB global shutter CMOS Sensor,Hyperspectral response and high quantum efficiency,CMOS SENSOR with ultra high sensitivity is comparable to CCD，Large target plane
EV76C661ABT,EV76C661ACT, e2v image sensor, 1280x1024 1.3megapixel, 1.3MP photosensitive chip, 1/1.8-inch sensor chip, Industrial camera monochrome RGB cmos, black and white image sensor, hyperspectral response and high quantum efficiency cmos,CMOS SENSOR with ultra high sensitivity is comparable to CCD,global shutter CMOS Sensor，Large target plane
Enhanced Vision,Seeing Beyond Limits
KEY BENEFITS
● 1.3 million pixels (1,024 (V) x 1,280 (H)), 5.3μm square pixels with micro-lens
● Enhanced sensitivity in the near infrared region
● High quantum efficiency (peak >70%)
● Low noise, rolling shutter allowing true CDS and global reset for best SNR (EV76C660)
● Global shutter for sharp images of fast moving objects (EV76C661)
● High speed: 60fps at full resolution, low-light CMOS sensor
● Multiple simultaneous regions of interest (four separate windows)
● Linear dynamic range >62dB @25°C with possible HDR modes
● Low power consumption, <200 mW
● Operating temperature (-30°C to +65°C)
● Package: CLCC 48 12.7mm x 12.7mm
● System on chip with SPI control and 10 bits parallel outputs
APPLICATIONS
EV76C660
● Surveillance IP/CCTV cameras
● Biometrics/medical applications
EV76C661
● Industrial machine vision
● Barcode reading/scanners
● Smart cameras
● Intelligent traffic systems
ORDER CODES
● EV76C660ABT: B&W, rolling shutter
● EV76C660ACT: Color, rolling shutter
● EV76C661ABT: B&W, global shutter
● EV76C661ACT: Color, global shutter
The EV76C660 and EV76C661 are the newest members of Teledyne e2v's Ruby family of CMOS imaging sensors. These breakthrough devices provide sensitivity and performance beyond that considered possible on a front side illuminated sensor with a pixel size of 5.3μm, Quantum Efficiency (QE) of over 80% and excellent sensitivity and performance in the near-infrared (NIR) spectrum (>50% at 850nm). This significantly reduces system illumination costs, or enables very low-light imaging in outdoor camera applications. The EV76C660 and EV76C661 share the same package, pin-out and software interface as Teledyne e2v's Sapphire family of imaging sensors, enabling them to provide a range of differentiated industrial camera products from a single hardware and software development effort.
SENSOR CHARACTERISTICS
● EV76C660 Rolling shutter/ EV76C661 Global shutter
● Resolution – pixels: 1,024 (V) x 1,280 (H) 1,024 (V) x 1,280 (H)
● Image size – inches: 1/1.8, 1/1.8
● Pixel size – μm : 5.3 x 5.3 /5.3 x 5.3
● Aspect ratio: 5:4/ 5:4
● Max frame rate – fps 60 @ full / >100 @ VGA 60 @ full / >100 @ VGA
● Pixel rate – Mpixels/s 90 to 120 90 to 120
PIXEL PERFORMANCE
● Bit depth – bits: 10 10
● Dynamic range – dB:>66 (linear) / >100 (HDR) >63 (linear) / >100 (HDR)
● SNR max –: dB: 39 /39
● Responsivity – LSB10/(Lux/s): 15,000 /13,000
● Power consumption
● Functional – mW <200/<200
● Standby – μW:180/180
Features
● 1.3 million (1280 x 1024) pixels, 5.3 μm square pixels with micro-lens
● Optical format 1/1.8"
● 60 fps@ full resolution
● Embedded functions:
– Image Histograms and Context output
– Sub-sampling / binning
– Multi-ROI (including 1 line mode)
– Defective pixel correction
– PLL with 5 to 50 MHz input frequency range (compatible with dithered master clock)
– High dynamic range capabilities
– Time to Read improvement (Abort image and Good first image)
● Timing modes:
– Global shutter in serial and overlap modes
– Rolling shutter allowing lowest readout noise and global reset
● Output format 8 or 10 bits parallel plus synchronization
● SPI controls
● Control input pins: Trigger, Reset
● Light control output
● 3.3 V and 1.8 V power supplies Performance Characteristics
● Low power consumption (200 mW)
● High sensitivity at low light level
● Operating temperature [-30° to +65°C]
● Peak QE > 65%
Available Sensor Types
● B&W
● Color (Bayer arrangement)
● Other (custom CFA) by request
Applications
● Surveillance IP/CCTV cameras
● Biometrics/Medical Imaging
● Industrial Machine Vision, Barcode Reading and Scanning
● Industrial Machine Vision, Barcode Reading and Scanning
Introduction
The EV76C661 is a 1.3 million pixel CMOS image sensor and a member of “Ruby” family. It is suitable for many different
types of application where superior performance is required. The innovative pixel design offers excellent performance in
low-light conditions with an electronic global (true snapshot) shutter, and offers a high readout speed at 60 fps in full resolution.
Its very low power consumption makes it well suited for battery powered applications.
Click or copy the link to free download the datasheet PDF file.
Freight is free when you buy 2 pieces in China, if you have EV76C661ABT inventory, you can sell to me, if you need buy EV76C661ABT, you can ask me to buy.
For more details and HD images, please copy the following link to open in your browser to view our official website；or visit our official website:
en.Sunnywale.com , searching keyword "
EV76C".
If you need a similar product,We also have some in stock：
EV76C560ABT 1/1.8" Original 2020+ monochrome black & white, 1280x1024
EV76C660ABT 1/1.8" Original 2016+ monochrome black and white, low illumination high sensitivity, 1280x1024, rolling shutter
EV76C660ACT 1/1.8" Original 2016+ Color RGB, low illumination high sensitivity, 1280x1024, rolling shutter
EV76C661ABT 1/1.8" Original 2019+ monochrome black & white, 1280x1024, global shutter
EV76C661ACT 1/1.8" Original 2012+ color RGB, 1280x1024, global shutter
If you want to read the introduction in English, please Clict the
中文版
Application case
iDS: UI-5241LE-NIR Rev.1.2 (AB10160) module, UI-5240SE-NIR-GL (Forest Fire Prevention Camera), engineer Lois Carrie from Paratronic, France explains: This particularly powerful industrial camera, the UI-5240SE-NIL-GL, is equipped with e2v's 1.3-megapixel CMOS sensor. Paartronic uses a highly sensitive sensor in the NIR version (EV76C661ABT). In addition to excellent photosensitivity, the sensor offers two global and roll-shutter variants that can be switched between operations. We chose this model for three main reasons: First, its spectral sensitivity is convincing. Second, the sensor picks up all visible color wavelengths, which has a particularly good sensitivity in near infrared; Third, continuous shooting allows for very high dynamic range. IDS Imaging Development Systems GmbH, Dimbacher Str. 10 I 74182 Obersulm I Germany Tel: +49 7134 96196-0 IE: s.gemmingen@ids-imaging.de IW: www.ids-imaging.com
MidiCam: I2D601N-MCB71 Part no.: 6060401,2 D machine vision midiCam, Basler Ace acA1300-60gmNIR, 1280 x 1024 NIR CMOS GigE Camera, market reference price: $879.00 each (we don't sell cameras) 1280 x 1024 images at 60 frames per second
The ace series of cameras offer fantastic value. The acA1300-60gmNIR is built on an e2v Ruby CMOS sensor to deliver 60 frames per second at full 1280 x 1024 resolution. The combination of resolution, frame rate, global shutter, overall performance, and price is without equal.
Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.
Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.
The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.
Because this camera is GigE Vision and GenICam compliant, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows and Linux platforms.
The ace series of cameras offer fantastic value. The acA1300-60gmNIR is built on an e2v Ruby CMOS sensor to deliver 60 frames per second at full 1280 x 1024 resolution. The combination of resolution, frame rate, global shutter, overall performance, and price is without equal.
Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.
1280 x 1024 1/1.8 Monochrome CMOS Sensor
This item is displayed for reference only, and is not for sale.
High quantum efficiency (~70% on visible light)
Great response in NIR wavelengths
Global shutter with 5.3 micron pixels
1280 x 1024 resolution
Description
The EV76C661 is a new member of e2v’s Ruby family of CMOS imaging sensors. This breakthrough device provides sensitivity and performance beyond that considered possible on a front side illuminated sensor with a pixel size of 5.3 μm, Quantum Efficiency (QE) of about 70%, and excellent sensitivity and performance in the near-infrared (NIR) spectrum (>40% at 850nm).
Miscellaneous
Sensor Resolution: 1280 (h) x 1024 (v) pixels
Pixel Size: 5.30 μm
Sensor Size: 8.69 mm
Sensor Active Area: 6.7840 (h) x 5.4272 (v) mm
Technology: CMOS Monochrome Progressive Scan
APPLICATION CASE:
The ace series of cameras offer fantastic value. The acA1300-60gmNIR is built on an e2v Ruby CMOS sensor to deliver 60 frames per second at full 1280 x 1024 resolution. The combination of resolution, frame rate, global shutter, overall performance, and price is without equal.
Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.
Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.
The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.
Because this camera is GigE Vision and GenICam compliant, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows and Linux platforms.
If you are not used to reading English, please browse the
中文版
