▇▇Low dark current

▇▇Auto black level calibration

▇▇Two wire serial interface. 16-bit address and 8-bit data

▇▇Support output format: YCbCr (4:2:2), RGB565, RGB555, RGB444, Raw, CCIR656, andRE also.

▇▇Support image size: HD (1280 x 720), and any size from scaling down 

▇▇Lens shading correction

▇▇Automatic control functions: Auto-Exposure control(AE)，auto White Balance(AWB)

▇▇Including: Sharpness, noise reduction, defect correction, gamma, color saturation adjust.

▇▇Specical effects included

▇▇Embedded 1.5V requlator for core power

▇▇Target module size: 8mm x 8mm 

▇▇Multi-Sensor Mode for 3D application

 

Parameter   Value

Array Size : 1284x724

Power Supply:  Digital:   1.5v ±

                         Analog : 3.0v-3.6V

                         I/O :       1.7v-3.6v

Pixel Size : 3.0 um x 3.0 um

Image Area : 3852umx2172um

ADC Resolution: 10 bits

Shutter : Electronic Rolling Shutter

Frame rate: 640x360 60fps

                    HD280x720 30fps

Color Filter Arrays : RGB Bayer pattern

Maximum Data Rate : 40Mp/s

Maximum Clock Rate : 80MHz

Power Consumption : 215 mW @HD JPG

                                   Standby: < 10 uA

 

The NT99141 is such a high performance image sensor that by incorporating a 1284H x 724V image aTay on-chip 10 bits ADC, and embedded image signal processor all the required image signal processing functions including sharpness, noise reduction, defect correction, gamma, and color saturation adjust - are @eaul supported, while its easy controllability and usability are maintained by the two-wire serial interface bus.

 

It is suitable for use in products such as cellular phones and PC cameras.