DA14580 Dialog 2.4GHz Bluetooth Rev4.2 standard wireless transceiver IC chip for any Bluetooth mobile portable terminal device
2023-10-06 19:39:34
Buy Now
DA14580-01AT1, DA14580-01A31, Dialog 2.4GHz, Bluetooth Rev4.2 standard IC, 2.4G wireless transceiver, 2.4G Bluetooth chip, Bluetooth mobile portable terminal device，Bluetooth communication connection
Bluetooth Low Energy 4.2 SoC
General Description
The DA14580 integrated circuit has a fully integrated radio transceiver and baseband processor for Bluetooth ® low energy. It can be used as a standalone application processor or as a data pump in hosted systems.
The DA14580 supports a flexible memory architecture for storing Bluetooth profiles and custom application code, which can be updated over the air (OTA). The qualified Bluetooth low energy protocol stack is stored in a dedicated ROM. All software runs on the ARM® Cortex®-M0 processor via a simple scheduler.
The Bluetooth low energy firmware includes the L2CAP service layer protocols, Security Manager (SM), Attribute Protocol (ATT), the Generic Attribute Profile (GATT) and the Generic Access Profile (GAP). All profiles published by the Bluetooth SIG as well as custom profiles are supported.
The transceiver interfaces directly to the antenna and is fully compliant with the Bluetooth 4.2 standard.
The DA14580 has dedicated hardware for the Link Layer implementation of Bluetooth low energy and interface controllers for enhanced connectivity capabilities.
Features
■ Complies with Bluetooth V4.2, ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)
■ Processing power
⊙16 MHz 32 bit ARM Cortex-M0 with SWD interface
⊙ Dedicated Link Layer Processor
⊙ AES-128 bit encryption Processor
■ Memories
⊙ 32 kB One-Time-Programmable (OTP) memory
⊙ 42 kB System SRAM
⊙ 84 kB ROM
⊙ 8 kB Retention SRAM
■ Power management
⊙ Integrated Buck/Boost DC-DC converter
⊙ P0, P1, P2 and P3 ports with 3.3 V tolerance
⊙ Easy decoupling of only 4 supply pins
⊙ Supports coin (typ. 3.0 V) and alkaline (typ. 1.5 V) battery cells
⊙ 10-bit ADC for battery voltage measurement
■ Digital controlled oscillators
⊙ 16 MHz crystal (±20 ppm max) and RC oscillator
⊙ 32 kHz crystal (±50 ppm, ±500 ppm max) and RCX oscillator
■ General purpose, Capture and Sleep timers
■ Digital interfaces
⊙ General purpose I/Os: 14 (WLCSP34 package), 24 (QFN40 package), 32 (QFN48 package)
⊙ 2 UARTs with hardware flow control up to 1 MBd
⊙ SPI+™ interface
⊙ I2C bus at 100 kHz, 400 kHz
⊙ 3-axes capable Quadrature Decoder
■ Analog interfaces
⊙ 4-channel 10-bit ADC
■ Radio transceiver
⊙ Fully integrated 2.4 GHz CMOS transceiver
⊙ Single wire antenna: no RF matching or RX/TX switching required
⊙ Supply current at VBAT3V: TX: 3.4 mA, RX: 3.7 mA (with ideal DC-DC)
⊙ 0 dBm transmit output power
⊙ -20 dBm output power in “Near Field Mode”
⊙ -93 dBm receiver sensitivity
■ Packages
⊙ WLCSP 34 pins, 2.436 mm x 2.436 mm(DA14580-01UNA，REEL50/100/1000/5000)
⊙ QFN 40 pins, 5 mm x 5 mm(DA14580-01AT，1=50/TRAY，2=5000/REEL)
⊙ QFN 48 pins, 6 mm x 6 mm(DA14580-01A3，1=50/TRAY，2=4000/REEL)
⊙ KGD (wafer=DA14580-01WO4, dice=DA14580-01WC4
DA14580-01A31, QFN48， 6 x 6mm， 50/Tray （Datasheet page 9）
All of the above pictures are taken after matting the online showing, what you see is what you get.
Click or copy the link to browser free download the DA14580 datasheet PDF file.
Freight is free when you buy 2 pieces in China, if you have DA14580 inventory, you can sell to me, if you need buy DA14580, you can ask me to buy.
If you want to know about similar products ***, or click here，or Visit The official website:
sunnywale.com，Search the keywods“**”,it can show more details.
or visit our official website:
Sunnywale.com , searching keyword "
14580".
If you want to read the introduction in English, please Clict the
中文版
