The deserializer can track data from a spreadspectrum serial input. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V. The device is available in a 32-pin (5mm x 5mm) TQFN and SWTQFN package with 0.5mm lead pitch and operates over -40°C to +115°C temperature range.
●● Automotive Camera Applications
Benefits and Features
●● Ideal for Safety Camera Applications
• Works with Low-Cost 50Ω Coax (100Ω STP) Cable
• Error Detection of Video/Control Data
• High-Immunity Mode for Robust Control-Channel EMC Tolerance
• Retransmission of Control Data Upon Error
• Best-in-Class Supply Current: 190mA (max)
• Adaptive Equalization for 15m Cable at Full Speed
• 32-Pin (5mm x 5mm) TQFN/SWTQFN Package
• Horizontal- and Vertical-Sync Encoding and Tracking
●● High-Speed Deserialization for Megapixel Cameras
• Up to 1.74Gbps Serial-Bit Rate
• 6.25MHz to 87MHz x 12-Bit + H/V Data
• 36.66MHz to 116MHz x 12-Bit + H/V Data (through Internal Encoding)
●● Multiple Modes for System Flexibility
• 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
• 2:1 Input Mux for Camera Selection
• 15 Hardware-Selectable I2C-Device Addresses
• Pairs with Any Maxim GMSL Serializer
• Crosspoint Switch Maps Data to any Output
●● Reduces EMI and Shielding Requirements
• Spread-Spectrum Serial-Input Tracking and Transfer to the Parallel Output
• 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
●● Peripheral Features for System Verification
• Built-In PRBS Receiver for BER Testing
• Eye-Width Monitor Allows In-System Test of High-Speed Serial Link
• Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
●● Meets AEC-Q100 Automotive Specification
• -40°C to +115°C Operating Temperature Range
• ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection