The IMX556 is a fully integrated optical Time-of-Flight (ToF) camera sensor. The sensor features 640 x 480 (VGA) 

time-of-flight pixels based on the DepthSense(TM) pixel technology. Combined with a modulated light source, this sensor is capable of measuring distance and reflectivity with VGA resolution. This chip operates with analog 2.7 V, digital 1.2 V, and interface 1.8 V triple power supply, and has low power consumption. The device features CSI-2 serial data outputs. 

 

IMX556PLR Application: FA cameras, Industrial cameras

 

◆ Back-illuminated Time-of-flight image sensor 

◆ High signal to noise ratio (SNR) 

◆ Full resolution @max60 frame/s (4phase/frame) 

◆ Pixel binning readout function 

◆ Independent flipping and mirroring 

◆ CSI-2 serial data output (MIPI 4lane, 960 Mbps/lane, D-PHY spec. ver. 1.2 compliant) 

◆ 2-wire serial communication (Supports I2C “Fast-mode”) / 4-wire SPI 

◆ 4-wire SPI Master for Illumination signal 

◆ 192 bits of OTP for users 

◆ Built-in temperature sensor 

◆ Package:136pin-LGA

 

◆ Time-of-Flight Image Sensor 

◆ Image size : Diagonal 8.0 mm (Type 1/2) 

◆ Total number of pixels : 642 (H) × 498 (V) approx. 0.319 M pixels 

◆ Number of effective pixels : 642 (H) × 484 (V) approx. 0.310 M pixels 

◆ Number of active pixels : 640 (H) × 480 (V) approx. 0.307 M pixels 

◆ Package size : 15.50 mm (H) × 15.00 mm (V) 

◆ Unit cell size : 10.0 μm (H) × 10.0 μm (V) 

◆ Substrate material : Silicon 

 

IMX556 is a Time-of-Flight (ToF) camera sensor which adopts the pixel architecture based on Current Assisted Photo Demodulator (CAPD) pixel with two tap shutter offers high responsivity, and high-speed image capturing. It is embedded with backside illuminated imaging pixel, low noise analog amplifier, column parallel A/D converters which enables high speed capturing, image binning circuit, timing control circuit for frame rate, CSI-2 image data high speed serial interface, PLL oscillator, and serial communication interface to control these functions. Several additional image processing functions and peripheral circuits are also included for easy system optimization by the users. 

A onetime programmable memory is embedded in the chip for storing the user data. It has 192-bit for users, 

2 K-bit as a whole. 

 

This sensor can write and read the setting values of the various registers shown in the Register Map by 4-wire serial communication or I2C communication. See the Register Map for the addresses and setting values to be set. 

 

The communication system is designated by the status of CMODE pin. Establish the CMODE pin status before 

canceling the system reset. (Do not switch this pin status during operation.) The CMODE pin can be opened. At 

this time, the communication method is designated to I2C. 

 

All of the above pictures are taken after matting the online showing, what you see is what you get.

 

Click or copy the link to browser free download the IMX556PLR datasheet PDF file.

 

Freight is free when you buy 2 pieces in China, if you have IMX556PLR inventory, you can sell to me, if you need buy **, you can ask me to buy. 

 

If you want to know about similar products IMX570PLR-C, or click here，or Visit The official website: sunnywale.com，Search the keywods“IMX570”,it can show more details.

 

For more details and HD images, please copy the following link to open in your browser to view our official website；or visit our official website: Sunnywale.com , searching keyword "IMX556PLR". 

 

If you want to read the introduction in English, please Clict the 中文版

 

Buy now IMX556PLR